Mini, submersible water pump. Material: ABS Load current: 0.35A Rated voltage: DC12V Rated current: 0.15A Water discharge capacity: 280L / H Head: 12V specifications head 2.2m. Water temperature: -20 ° C ~ 90 ° C Environmental humidity: 45% to 90% Lifetime: 20.000h. Brushless motor. Easy to operate. Size: 4.5 * 2.5cm. Weight: 40g.
Low consumption & noise. High-performance ceramic shaft. Brushless, permanent magnetic rotor. Inlet/outlet diameter: 8mm. Working lifespan: 20000h. Power consumption: 2.3W Heat resistance: 0-100° Flow rate: 220L/H Waterproof: IP68 Voltage: DC5V Current: 416MA Noise: ≤40DB Material: plastic. Size: 54 * 37 * 42mm. Cable length: 45cm.
12v or 24v brushless water pump Material: plastic. Power: 22W Voltage: 12V DC / 24V DC Max water head: 5m. Max flow rate: 800 L/H Inlet/outlet: 1/2" male thread Maximum rated current: 1000MA Max circulating water temperature: 100°C Suitable temperature 1 ℃ -60 ℃. Size: ~ 6.5 * 8cm. Please select a voltage.
Solar powered fountain pump kit. For fountains, waterfalls and water displays. Runs automatically, no battery or electricity needed. 3 different water outlet caps. Wide irrigated areas. Max flow quantity of pump: 200L/H Solar battery power: 7V, 1.4W Pump power: 4.5-12V Solar panel size: 16cm. Lifetime: over 20000h. Delay: less than 3s.
Priming Diaphragm Pump Spray . Working voltage: DC12V Working current: 0.5-0.7A Empty load current: 0.18A Max. suction: 2m. Outlet diameter: 6mm. Outer diameter: 9mm. Traffic: ~ 1.5-2 /min. Lift : vertical up to 3m. Life: up to 2500H Water temperature: up to 80 degrees When voltage 6V : power is 6W / H, 6-12v..5w - 10w Size: 90 * 40 * 35mm. Weight: 106g.
MKBP-G1100-12 12V Rule 1100gph Bilge Water Pump Pump and switch are stand alone products. Compact, efficient. FREE WORLDWIDE SHIPPING
Maintains pressure and flow. Easy to operate with simple push button controls. Led lights indicate the functioning of the pump. Automatically stops if no water is in the pump. No pressure tank required. Automatic control for water pump. Input Voltage: 220V-240V Frequency: 50-60Hz Max. Current: 10A Max. Power: 1.1KW - 1.5KW Max. Working Pressure: 10Bar...
Model: 0142YB-12-60 Voltage: 12V Power: 60W Intake pressure: 0.2Mpa Rated pressure: 0.8Mpa Flow (max): 5L/min Suction distance: 2m Lift: 80m Range: 8m Motor lifespan: 3-5years Net weight: ~ 0.6Kg Material: plastic Size: ~ 16.5*9.5*6cm (L*W*H) FREE WORLDWIDE SHIPPING
Very easy to clean, just pull out and push back in and ready. Suitable for aquarium, chemicals, liquids, dosing additives. Working environment : 0-40 ℃ Flow range: 0-100 ml / min Speed range: 0.1-100 rpm Motor RPM: 5000RPM Drive size (Φ x H): (dia) 27.6 x 37.9mm (h) Head size (Φ x H): (dia) 31.7 x 20.1mm (h)
Voltage : 2.5-6V Maximum lift : 40-110cm / 15.75"-43.4" Flow rate : 80-120L/H Outside diameter : 7.5mm / 0.3" Inside diameter : 5mm / 0.2" Diameter : Approx. 24mm / 0.95" Length : Approx. 45mm / 1.8" Height : Approx. 30mm / 1.2" Material : Engineering plastic Driving mode : DC design, magnetic driving Continuous working life for 500 hours
Small size, high efficiency brushless pomp. Input : DC 12V 350mA Max flow rate : 280L/H Max Static Head : 250cm. Cable length : 43cm. Total Sizes : ~ 46 * 36 * 30mm. Net weight : 69g.
Small size, high efficiency brushless pomp Power consumption : 5W Rated voltage : 12V DC Max rated current : 400mA Static flow rate : 240L/H Static lift : 3M Noise: <35dB Outer diameter of inlet / outlet : 8.6mm Inner diameter of inlet / outlet : 5.4mm Water proof class : IP68 Product size : 5.2 * 4.6 * 5.5cm